Conference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and development

On the afternoon of October 17th , 2025, the School of Mechanical and Automotive Engineering (SMAE), Hanoi University of Industry, organized the Conference of class monitors and secretaries of Youth Union branches for the 2025-2026 academic year. The conference was held with the objective of summarizing and evaluating student affairs and Youth Union movements during the 2024-2025 academic year, while simultaneously launching emulation movements for the 2025-2026 academic year. In particular, the conference served as a crucial forum to listen to feedback from learners, aiming to comprehensively improve quality and build a positive culture of conduct within the university environment.

In an open and constructive atmosphere, the conference recorded practical contributions from representatives of the Youth Union branches. This feedback clearly demonstrated the sense of responsibility and the strong attachment of students to the School.

Speaking at the conference, Assoc. Prof. Dr. Hoang Tien Dung – SMAE’s Rector, expressed his appreciation for the sincere sharing and the trust that students have placed in the School. "Compliments regarding the faculty, the learning environment, the dedication, and the positive changes of the School... serve as a tremendous source of encouragement, energizing lecturers to continue their dedication," he stated. These words of praise will be conveyed to each lecturer, so they know that their silent contributions are being seen, understood, and cherished by the students. The Rector also affirmed: "Your frank and practical suggestions are an important basis for the School to continue perfecting itself, constantly improving training quality, and innovating service work." He candidly acknowledged that while some issues can be resolved immediately, others require coordination among various departments, more time, resources, and especially the companionship of the students themselves. However, the consistent message is that SMAE is always ready to listen, values all feedback, and strives tirelessly to build a learning, research, and training environment with students that is increasingly higher in quality, more modern, and more humane.

Conference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and development

The speech of Assoc. Prof. Dr. Hoang Tien Dung – SMAE’s Rector

During the conference, Mr. Trinh Dac Phong – Secretary of the School’s Youth Union, provided a detailed summary of academic results, scientific research, as well as Youth Union and Student Association activities for the 2024-2025 academic year. He also announced the plan and key events for the 2025-2026 academic year.

Conference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and development

Student representatives from various Youth Union branches also spoke directly, offering specific and practical suggestions.

With 127 years of establishment and development, SMAE continues to affirm its reputation and training quality through the success of generations of alumni, the trust of industry partners, and recognition in prestigious rankings.

Concluding the conference, SMAE calls upon every student to continue nurturing the core values that shape the School's identity. These values are rooted in a comprehensive educational philosophy aimed at the harmonious development of "Heart – Body – Mind," in which "Heart" represents moral qualities, serving as the primary value and the foundation for each individual's development. Students are encouraged to become active ambassadors, spreading pride and contributing to affirming the position and elevating the brand value SMAE through their efforts in study, research, and community service.

SOME IMAGES AT THE CONFERENCE OF CLASS MONITORS AND SECRETARIES OF YOUTH UNION BRANCHES FOR THE 2025-2026 ACADEMIC YEAR, SMAE:

Conference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and developmentConference of class monitors and secretaries of Youth Union branches at the School of Mechanical and Automotive Engineering: Putting students at the center, listening for innovation and development

  • Thứ Hai, 09:38 20/10/2025

Tin tiêu điểm

Đại học Công nghiệp Hà Nội tiếp đón và làm việc với Công ty TNHH Denso Việt Nam

Đại học Công nghiệp Hà Nội tiếp đón và làm việc với Công ty TNHH Denso Việt Nam

Thứ Tư, 16:31 02/10/2024
Thông báo đăng ký Hội thảo tuyển dụng trực tiếp của Công ty TNHH Hanwha Aero Engines

Thông báo đăng ký Hội thảo tuyển dụng trực tiếp của Công ty TNHH Hanwha Aero Engines

Thứ Sáu, 16:37 12/04/2024
Không khí chào mừng ngày Quốc tế phụ nữ 8/3 tại Trường Cơ khí – Ô tô

Không khí chào mừng ngày Quốc tế phụ nữ 8/3 tại Trường Cơ khí – Ô tô

Thứ Sáu, 15:40 08/03/2024
Nữ sinh Phạm Nhật Tâm – gương mặt sáng của Khoa Hệ thống Công nghiệp, Trường Cơ khí – Ô tô, HaUI

Nữ sinh Phạm Nhật Tâm – gương mặt sáng của Khoa Hệ thống Công nghiệp, Trường Cơ khí – Ô tô, HaUI

Thứ Hai, 13:48 26/02/2024
“Xuân đoàn viên, Tết sẻ chia” mang lại niềm vui cho 50 sinh viên có hoàn cảnh khó khăn Trường Cơ khí – Ô tô

“Xuân đoàn viên, Tết sẻ chia” mang lại niềm vui cho 50 sinh viên có hoàn cảnh khó khăn Trường Cơ khí – Ô tô

Thứ Năm, 15:46 25/01/2024

Các bài đã đăng

Integrating advanced manufacturing technology into training: Hanoi University of Industry inaugurated 5-Axis CNC Machine Room.

Integrating advanced manufacturing technology into training: Hanoi University of Industry inaugurated 5-Axis CNC Machine Room.

Thứ Sáu, 16:49 26/12/2025
Study Abroad and Career Development Opportunities for Students of the School of Mechanical and Automotive Engineering at the INTENSE Taiwan (China) Scholarship Introduction Program

Study Abroad and Career Development Opportunities for Students of the School of Mechanical and Automotive Engineering at the INTENSE Taiwan (China) Scholarship Introduction Program

Thứ Sáu, 13:16 12/12/2025
HaUI affirms stature as innovation university: 11 Associate Professors honored in 2025

HaUI affirms stature as innovation university: 11 Associate Professors honored in 2025

Thứ Năm, 16:29 11/12/2025
Career Counseling and Recruitment Workshop for Students of the School of Mechanical Engineering and Automotive Technology – Connecting 20 Enterprises with Over 1.500 Students

Career Counseling and Recruitment Workshop for Students of the School of Mechanical Engineering and Automotive Technology – Connecting 20 Enterprises with Over 1.500 Students

Thứ Ba, 16:04 25/11/2025
School of Mechanical and Automotive Engineering received Moldex3D software sponsorship from Coretech System Co., Ltd with the value being 3.9 million dollars

School of Mechanical and Automotive Engineering received Moldex3D software sponsorship from Coretech System Co., Ltd with the value being 3.9 million dollars

Thứ Tư, 09:46 05/11/2025
"SMAE's 2025 Mid-Autumn Festival" - Strengthening Bonds and spreading joy

"SMAE's 2025 Mid-Autumn Festival" - Strengthening Bonds and spreading joy

Chủ Nhật, 15:18 05/10/2025
Conference of officials and employees of the School of Mechanical and Automotive Engineering: Innovation and Creativity in the Industry 4.0 Era

Conference of officials and employees of the School of Mechanical and Automotive Engineering: Innovation and Creativity in the Industry 4.0 Era

Thứ Hai, 15:16 29/09/2025
A Vibrant Welcome for K20 Freshmen - The new academic year kicks off a breakthrough journey

A Vibrant Welcome for K20 Freshmen - The new academic year kicks off a breakthrough journey

Thứ Hai, 14:47 29/09/2025
Synce Trading Co., Ltd donated a set of cutting tools to the School of Mechanical and Automotive Engineering

Synce Trading Co., Ltd donated a set of cutting tools to the School of Mechanical and Automotive Engineering

Thứ Bảy, 15:31 20/09/2025
Discover the School of Mechanical and Automotive Engineering through a student's perspective: Dynamic, modern, and internationally integrated!

Discover the School of Mechanical and Automotive Engineering through a student's perspective: Dynamic, modern, and internationally integrated!

Thứ Hai, 20:10 08/09/2025

Video giới thiệu